RustSeal and BlackTop Used To Restore Utility Trailer
“Using KBS Klean, RustBlast & RustSeal and BlackTop made this trailer restoration job much easier and virtually less time consuming verses the traditional practice of grinding rust, priming and spray painting. As reflected in the pictures, KBS will exceed your expectations.” -Randy P.
RustSeal and KBS UnderCoat Used on 1987 Chevy R10
“1987 Chevy R10. Used RustSeal on underside of cab and applied KBS UnderCoat Rubberized as a top coat.” – Jeff R.
86 GMC Sierra Frame – Before and After
“I wanted to thank you for such a great product. I’m restoring my 1986 GMC Sierra Classic & wanted to freshen up the old rusty frame. I purchased the Large Frame Kit & was extremely impressed by how easily it was to use and how well it worked on even the rustiest of surfaces. The finished product was awesome! Thanks again!” -VS
RustSeal Used To Restore Frame
Frame Coater Kit: https://www.kbs-coatings.com/frame-coater-kit.html
The KBS Frame Coater Kit contains everything you need to clean, prep, & apply two coats of RustSeal on up to a 50 square foot area.
KBS Coatings’ 3-STEP SYSTEM of RustSeal (a rust preventive coatings), KBS Klean (an industrial strength water-based cleaner / degreaser) and KBS RustBlast (a powerful rust remover / metal etch) is the most effective rust and corrosion prevention system available today.
RustSeal chemically bonds to bare metal to form a permanent, moisture resistant finish that is flexible yet won’t crack, chip, or peel. Because RustSeal is moisture-cured, this superior coating is made even stronger by continued exposure to moisture.
RustSeal is also highly resistant to some of the most aggressive chemicals such as acids, alkalis, salts, abrasive materials, fertilizers, coal dusts, solvents, oils, and other refined petroleum products.
Fixed Rusty Windshield Channel
“Leaky windshield removed to reveal rusty channel. Cleaned with wire brush and then followed directions as described. Channel looks great and ready for glass!”
1968 Jeep CJ5 Frame
“I am working on a frame-off restoration 1968 Jeep CJ5. The frame was sandblasted then coated with two coats of KBS RustSeal applied with a 2″ brush. There was little to no rust on my frame, so per the application flow chart, the RustSeal was applied directly to the clean blasted metal.” -Tim E.
Be sure to check out RustSeal.