Customer Photos – Gas Tank Sealer Kits
Our Gas Tank Sealer Kits contain everything you need to clean, prep & permanently seal up your gas tank. The Tank Sealer is impervious to all fuels and alcohol additives!
This Gas Tank Kit Worked Perfectly – Feedback from Customers
“The gas tank coating kit worked perfectly. 40 year old tank in pretty ruff shape. Buy replacement or restore were the choices. To keep the originality and knowing the finished gas tank would fit I went with the restore option. I am very happy with the finished product. I put a section of logging chain in the tank during the clean out process. It seemed to help knock down the crusty growths. Yes I would recommend this product.” – Carl W. from The Villages, FL
Spring is Here – Time For Gas Tank Sealer
SPRING IS HERE: TIME TO GET THE BIKE OUT
“I tried this product myself … WORKED GREAT!!!!!”
Dave Stewart, Product Specialist for JP Cycles
Rust happens! The best defense against rust is a great offense. This proven 3-Step cost saving kit is designed to clean, prep, and seal your motorcycles, generators, lawn mowers, tractors, snowmobiles, or other small tanks up to 5 gallons. Detailed instructions included.
steel, aluminum & fiberglass fuel tanks, oil tanks, diesel tanks, utility tanks, non-potable water tanks and many more…
Cycle Tank Sealer Kit Contains:
- Quart of AquaKlean
- Quart of RustBlast
- 8oz. of Gold Standard Tank Sealer
- Black Lightning Gloves
- Stir Stick
- Piece of BackBone Reinforcing Mesh
- Detailed Instructions
Have a Previous Coating? Have a tank larger than 5 gallons?
+CHECK OUT ALL OF THE KBS TANK SEALER KITS
Gold Standard Tank Sealer Feedback on JalopyJournal.com
Gas Tank Sealer Kits
Used by professionals worldwide, Gold Standard Fuel Tank Sealer is a superior, one part, ready-to-use fuel tank sealer that is specifically formulated to stop rust and corrosion. When used in combination with AquaKlean and RustBlast, it will form a super-tough, fuel and alcohol impervious coating, while simultaneously sealing small pinholes and weld seams. It’s been rated as the industry’s NEW Gold Standard in gas tank sealers.
Gold Standard Tank Sealer may be used on steel, aluminum, and fiberglass tanks.
Applications: Gas Tanks, Diesel Tanks, Oil Tanks, Utility Tanks, Motorcycle Tanks, 4-Wheeler Tanks, Tractor Tanks, Generator Tanks and many others…
Available in Convenient Kits for most sizes of tanks!
Customer Feedback on Tank Sealer
I noticed a very strong gasoline smell coming from my garage one day,I Started looking around at all my toys and noticed my motorcycle gas tank was leaking.
I started looking online for a new one(Ebay)first,All I could find was used ones that where dented and beat up for $300.00 to $500.00 range,As my bike is a 1989 they are a rare find.
I then went to some online motorcycle forums to see what other people where doing to fix their tanks and came across the KBS Coatings name as being one of the best repair options out there. There is a few other companys offering tank sealer kits but KBS was rated as a much better product to use. So I ordered the 3 part system kit and was pretty easy to do. The Aquaklean and Rustblast formulas work very well. It started off with a pin hole leak and ended up with roughly 10 more when I was done the 1st two processes,I ended up ordering their NuMetal Epoxy to be sure the holes where filled before sealing was put in. All said and done about 10%cost 0f a new tank,It is a real good deal and very easy process to do.
You can find complete instructions for the Gold Standard Gas Tank Sealer here: http://www.kbs-coatings.com/Gold-Standard-Tank-Sealer-Information-Instructions_ep_39-1.html
You can also find the Fix-It Guide which will help you quickly identify the causes of and the recommended solutions for the most common issues that could occur with Tank Sealer here: http://www.kbs-coatings.com/fix-it-guide-tank-sealer.html
You can also find Instructional Videos here: http://www.kbs-coatings.com/KBS-Videos_ep_90-1.html
You can also find Tank Sealer Flow Charts here: http://www.kbs-coatings.com/Flow-Chart–Tank-Sealer_ep_88-1.html
Tip of the Month – Tank Sealer
PATIENCE IS A VIRTUE THAT WILL BE REWARDED…
Over the years, one of the BEST TIPS that we can give to people who are sealing a tank is to BE PATIENT. Proper prep and sealing IS NOT a lunch hour project. The KBS 3 Step System works perfectly if the Instructions are followed which includes:
- Be Patient and allow the AquaKlean the time to thoroughly dissolve all the oily fuel residues before rinsing.
- Be Patient and allow the RustBlast to soak and disintegrate the rust in your tank before rinsing.
- Be Patient while waiting for the tank interior to dry completely as the tank can NEVER be too dry!
- Be Patient and allow the tank to cool to room temperature before applying the sealer.
- Be Patient when sloshing the sealer around to insure complete coverage.
- Be Patient when draining any & all excess sealer from the tank.
- Be Patient while waiting for the sealer to cure.
Feedback on Gas Tank Sealer
“I own an independent Harley Davidson motorcycle repair shop. I have used KBS coatings for a long time and have found your products to be way above the rest.
At the present time I am working on a 1953 Indian Chief restoration. Someone previously used and inferior product to seal the tank. Needless to say it is peeling off inside. I have full confidence the KBS stripper will remove all the old sealer, so I can properly re-seal this tank with the 3 step process. Thus allowing this old Indian Chief to roar to life once again.
I wouldn’t trust anything else but KBS for this valuable antique.”
See what others are saying about KBS Gas Tank Sealer here: http://www.kbs-coatings.com/customer-feedback.html
Check out the Knowledgebase on Tank Sealer here: https://helpdesk.kbs-coatings.com/index.php?_m=knowledgebase&_a=view&parentcategoryid=1&pcid=0&nav=0