XTC On A Grill

“Glass bead blasted the entire surface. Two thin coats of XTC Zinc Primer 24 hrs. apart. Then Two coats of XTC Stainless Steel paint 24 hrs. apart. I then used some Black for the handle, Red for the vents and Flame Blue for the trim & drawers. I’m tickled with the end product and look forward to many many years of maintenance free service. Used a Wagner Power Sprayer & it worked great.” -Steve S

XTC Primer | XTC

Clear Coated Plywood Sign

“This was a 4 X 8 foot plywood sign (double-sided) that I originally did about 8 years ago, for a friend’s restaurant. It was very faded and weathered; but the basic plywood was still in good shape. So we sanded it well, primed and re-lettered it.(hand painted). Then put the KBS Diamond Clear on it. Looks great!! It sits out in a parking lot, with one side in the sun for most of the day … I’m very satisfied with the product, so far.” -Dale F.

DiamondFinish Clear

68 C-10 Engine

“Before & After pics of my LT1/4L60E for my ’68 C-10 project. All coatings are Motor Coater. Block is Velvet Black, the rest are Gloss Black, and Aluminum that has been Diamond Clear-coated. Diamond Clear on raw polished aluminum and steel parts as well. Motor Coater and Diamond Clear are my “go to” coatings for the things I want to have a nice finish on. Awesome stuff!” -Chad M.

Motor Coater | DiamondFinish Clear

KBS Top Coater – Wheel Paint

“Spray paint is swell, goes on easy covers imperfections pretty good. Thanks!” -Robert R.

KBS Top Coater

 

1972 Buick Riviera – Engine Restoration

“When undertaking a custom engine install on my 1972 Buick Riviera the KBS BlackTop OEM Satin Black did absolute wonders for refreshing the engine bay. My choice of color for the new crate engine is KBS MG Maroon Engine Paint. KBS clear was used for the final clear coat on the car and when spraying the KBS clear in several light coats I had excellent results. I will use KBS paint products again for future restoration projects” -David P.

BlackTop | Motor Coater | DiamondFinish Clear

1956 Chevy – Frame Restoration

“This frame from my 1956 Chevy was extremely rusted and I wasn’t sure how it would turn out however, as you see it’s remarkable! I will use KBS products on all my restoration projects.” -Jeff M

https://www.kbs-coatings.com/frame-coater-kit.html

Restored Truck Frame

“I restored the rear half of my truck frame using KBS Klean, RustBlast, an Angle Grinder and RustSeal. The products worked well and the finished product looks incredible!”  – Justin B

1976 Honda Trail 70

“1976 Honda trail 70 I restored using all KBS products. KBS Strip, RustBlast, Black & Crazy Plum MAXX paint & DiamondFinish Clear … All products worked just like they said they would. MAXX & Clear sprayed perfect with high gloss an no runs … As a matter of fact I couldn’t make it run!!! All dried supper hard! Then used KBS UnderCoat inside frame. On motor cases I used the silver Motor Coater & topped it with the DiamondFinish Clear. I tell all my friends about how good KBS Products are!” -Robert T.

 

Fixed Rusty Windshield Channel

“Leaky windshield removed to reveal rusty channel. Cleaned with wire brush and then followed directions as described. Channel looks great and ready for glass!”
-Jason A.

Be sure to check out the System Sampler and BlackTop.

Brush-On Clear Coat

“DiamondFinish Clear came out really great after letting the base coat (Pettit EasyPoxy polyurethane/silicone) cure for a week and after only one coat of DiamonFinish brush-on clear, some wet sanding with 1000 and 2000 grit and compound in some areas and to fix a few sags due to shape of the object. …I’m very happy with the result.” -Marinus

Please check out DiamondFinish Clear.