This Gas Tank Kit Worked Perfectly – Feedback from Customers
“The gas tank coating kit worked perfectly. 40 year old tank in pretty ruff shape. Buy replacement or restore were the choices. To keep the originality and knowing the finished gas tank would fit I went with the restore option. I am very happy with the finished product. I put a section of logging chain in the tank during the clean out process. It seemed to help knock down the crusty growths. Yes I would recommend this product.” – Carl W. from The Villages, FL
Gold Standard Tank Sealer Feedback on JalopyJournal.com
Customer Photos: Cat Yellow RustSeal
CAT YELLOW RUSTSEAL APPLIED TO MACHINERY
One of our customers uses Cat Yellow RustSeal as a safety yellow paint on the machinery at thier shop. They really like the RustSeal and sent us some pictures to show us the Cat Yellow RustSeal in action.
FEATURES OF RUSTSEAL – THE BEST STOP RUST PAINT
- CAN BE APPLIED DIRECTLY OVER RUST!
- SEALS & ENCAPSULATES RUST AND POROUS SURFACES
- APPLY BY BRUSH, ROLLER, OR SPRAY.
- SUPER STRONG AND FLEXIBLE – HAMMER TOUGH!
- HIGHLY RESISTANT TO MOST CHEMICALS
- MODERATE UV STABILITY, UNLIKE OTHERS WHICH CAN CHALK WITHIN WEEKS
- COMPATIBLE WITH ALL PAINT SYSTEMS
- ALL COLORS ARE COMPLETELY NON-POROUS
MORE INFORMATION AND DIRECTIONS ON RUSTSEAL
At KBS Coatings, we believe that offering the best Rust Preventive products is simply not enough. We alse believe in offering the best world-class customer support for using and applying all of our superior Rust Preventive products.
Customer Feedback on Tank Sealer
I noticed a very strong gasoline smell coming from my garage one day,I Started looking around at all my toys and noticed my motorcycle gas tank was leaking.
I started looking online for a new one(Ebay)first,All I could find was used ones that where dented and beat up for $300.00 to $500.00 range,As my bike is a 1989 they are a rare find.
I then went to some online motorcycle forums to see what other people where doing to fix their tanks and came across the KBS Coatings name as being one of the best repair options out there. There is a few other companys offering tank sealer kits but KBS was rated as a much better product to use. So I ordered the 3 part system kit and was pretty easy to do. The Aquaklean and Rustblast formulas work very well. It started off with a pin hole leak and ended up with roughly 10 more when I was done the 1st two processes,I ended up ordering their NuMetal Epoxy to be sure the holes where filled before sealing was put in. All said and done about 10%cost 0f a new tank,It is a real good deal and very easy process to do.
You can find complete instructions for the Gold Standard Gas Tank Sealer here: http://www.kbs-coatings.com/Gold-Standard-Tank-Sealer-Information-Instructions_ep_39-1.html
You can also find the Fix-It Guide which will help you quickly identify the causes of and the recommended solutions for the most common issues that could occur with Tank Sealer here: http://www.kbs-coatings.com/fix-it-guide-tank-sealer.html
You can also find Instructional Videos here: http://www.kbs-coatings.com/KBS-Videos_ep_90-1.html
You can also find Tank Sealer Flow Charts here: http://www.kbs-coatings.com/Flow-Chart–Tank-Sealer_ep_88-1.html
Gonzo Talks about Tank Sealer Kits
“I own a 71 Moto Guzzi that I’ve been painstakingly rebuilding. Well, I sent the gas tank out to be pressure tested and sealed prior to doing anything on the bike. I got it back and you could see the coating. Well, after several years and getting the bike painted we got her back together and on our maiden voyage we discovered a leak in the tank. Well what can i do? It’s been several years sense I had it painted. Well a friend told me of your product. I purchased it and after following the directions to the “t” I can’t be any happier. I would and do recommend this product to anybody that has a leak!”
“Your truly a very happy gonzo!”
Mike Talks about KBS Frame Coater Kit
"Frame Coater Kit was just the right amount for two coats top and bottom of tub on a 1965 Toyota Land Cruiser restoration. Great product; easy to use and self leveling characteristic makes it look like I knew what I was doing!"- Mike J.
Feedback on Gas Tank Sealer
“I own an independent Harley Davidson motorcycle repair shop. I have used KBS coatings for a long time and have found your products to be way above the rest.
At the present time I am working on a 1953 Indian Chief restoration. Someone previously used and inferior product to seal the tank. Needless to say it is peeling off inside. I have full confidence the KBS stripper will remove all the old sealer, so I can properly re-seal this tank with the 3 step process. Thus allowing this old Indian Chief to roar to life once again.
I wouldn’t trust anything else but KBS for this valuable antique.”
See what others are saying about KBS Gas Tank Sealer here: http://www.kbs-coatings.com/customer-feedback.html
Check out the Knowledgebase on Tank Sealer here: https://helpdesk.kbs-coatings.com/index.php?_m=knowledgebase&_a=view&parentcategoryid=1&pcid=0&nav=0
INTERNATROLET on V8S10.org says..
“Just thought I’d share. I can’t say enough good things about this stuff. If you need to paint a rusty frame or underbody or tank, this is what you want. I have used it several times with ZERO failures.
I have tried that Other Stuff and it’s good but not like this. The Other Stuff has a good high temp engine paint but for rust converter, KBS!”
Click here for the entire thread: http://www.v8s10.org/forum/viewtopic.php?f=26&t=23975
You can read what others are saying about stopping rust with KBS Coatings: http://www.kbs-coatings.com/customer-feedback.html