XTC Jet Black Before and After Pictures

“Restoring a 1929 Chevrolet 4 Door International with a first Generation 194 cu 6 Cylinder Engine. I blasted the Exhaust manifold, then cleaned and prepped it to remove any debris and oil. primed following instructions, 2 coats. Then top coated with the XTC 2 Coats, then Cured it per instructions. It came out better then expected. I am really happy!” -Jerry A.

XTC: https://www.kbs-coatings.com/XTC.html

XTC Primer: https://www.kbs-coatings.com/XTC-Primer.html

XTC Now Available In Clear

XTC is now available in Clear which adds gloss and clarity to your finish! XTC is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500° F to 1500° F. With proper preparation, XTC provides outstanding adhesion, film integrity, weathering, and thermal shock-resistance throughout this entire temperature range, and is guaranteed not to burn off!

XTC Jet Black on Headers

XTC is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500° F to 1500° F. With proper preparation, XTC provides outstanding adhesion, film integrity, weathering, and thermal shock-resistance throughout this entire temperature range, and is guaranteed not to burn off! Available in 10 great colors.

XTC: https://www.kbs-coatings.com/XTC.html

RustSeal Used To Restore Frame

Frame Coater Kit: https://www.kbs-coatings.com/frame-coater-kit.html

The KBS Frame Coater Kit contains everything you need to clean, prep, & apply two coats of RustSeal on up to a 50 square foot area.

KBS Coatings’ 3-STEP SYSTEM of RustSeal (a rust preventive coatings), KBS Klean (an industrial strength water-based cleaner / degreaser) and KBS RustBlast (a powerful rust remover / metal etch) is the most effective rust and corrosion prevention system available today.

RustSeal chemically bonds to bare metal to form a permanent, moisture resistant finish that is flexible yet won’t crack, chip, or peel. Because RustSeal is moisture-cured, this superior coating is made even stronger by continued exposure to moisture.

RustSeal is also highly resistant to some of the most aggressive chemicals such as acids, alkalis, salts, abrasive materials, fertilizers, coal dusts, solvents, oils, and other refined petroleum products.