1956 Chevy – Frame Restoration
“This frame from my 1956 Chevy was extremely rusted and I wasn’t sure how it would turn out however, as you see it’s remarkable! I will use KBS products on all my restoration projects.” -Jeff M
https://www.kbs-coatings.com/frame-coater-kit.html
1968 Jeep CJ5 Frame
“I am working on a frame-off restoration 1968 Jeep CJ5. The frame was sandblasted then coated with two coats of KBS RustSeal applied with a 2″ brush. There was little to no rust on my frame, so per the application flow chart, the RustSeal was applied directly to the clean blasted metal.” -Tim E.
Be sure to check out RustSeal.
Gas Tank Coated Inside and Out
“Finished my fuel tank this past weekend and all went well. I had first started with cleaning the tank and welding a few holes up in my 44 gallon aluminum tank. I do have to say that this all took a matter of weeks to complete because of proper drying and work schedule. The process was very straight forward. I couldn’t believe how well the Gold Standard coated the inside of the tank with multiple baffles in the tank. I then painted the exterior with gloss black. This being in the hull of my boat never to be seen by sun again but it sure looks good. Thanks for such a great product!” -Glenn B.
1980 Chevy K10 Restoration
“Frame up Restoration of a 1980 Chevy K10. Coated the springs, differentials and other assorted parts that will be out of sight. Coated with RustSeal after sandblasting. As advertised these products appear to be the easiest and most durable to use.” – Michael P.
Clear Coat with Blue Metal Flake
“First of all I’m not a professional painter, but I’m not afraid to try anything. I bought this boat & the top coat looked rough. I searched the Internet looking at different kinds of paints. I come across kbs coatings & thought I would give it a try. The boat had alot of small cracks from the weather over the years. I thought the great flexibility of this paint would work great. I applied 3 coats of RustSeal Satin, then 3 coats of the BlackTop Satin. I then sprayed a coat of DiamondFinish Clear & added my cobalt blue metal flake. I topped it off with 3 coats of DiamondFinish Clear. I am very pleased with the results and I would recommend this product. Thanks KBS!” – Robert W.
Rust Prevention On Tiger Cages
“Attached are some pics of our tiger enclosure we started to paint.These are the enclosures the cats sleeps in overnight when the temp drops down to zero degrees. The paint works really well and seems to do a good job with keeping the urine off and preventing the rust that the urine causes.”
-Scott G @ Great Bend Zoo
Floorpans – Before and After – Rust Prevention
“RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel.” -HPC Distributions
Check out the KBS Rust Prevention System HERE.
Seal Up Rusty Lawnmower Decks
Remember Your Lawnmowers!
As you are pulling out your lawnmowers and getting them ready for spring, remember that RustSeal on the underside of the deck will prevent rust and the slick surface provided by the RustSeal will prevent grass from sticking to the deck and clogging up the discharge.
Pick a glossy finish like Gloss Black for the slickest surface and watch the grass fall right off and not clog up your mower.
+Go HERE to order the System Sampler which contains everything you need to clean, prep, & apply two coats of RustSeal on up to a 12.5 square foot area.
4 Quart Special – Save on Rust Prevention
Get 4 Quarts of RustSeal … Maximize Your Savings on Rust Prevention!
Buy four quarts of RustSeal to maximize your savings and avoid waste. Best buy for multiple larger size projects where rust prevention is required. Each RustSeal quart provides 2 coats of coverage for an approx. 50 sq. ft. area. Mix or match colors.
Features
• Quarts are more convenient than a gallon.
• Less clean-up.
• Less waste.
• Mix and match any of our 10 colors.
• Unopened RustSeal lasts at least 2 years.
+Go Here to Order The 4 Quart Special
RustSeal Features
RustSeal is a superior one part, ready-to-use, high-solids content, rust preventive coating, that is actually hardened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel.
Seal Your Lawnmower Deck To Prevent Grass From Sticking
Remember Your Lawnmowers!
As you are pulling out your lawnmowers and getting them ready for spring, remember that RustSeal on the underside of the deck will prevent rust and the slick surface provided by the RustSeal will prevent grass from sticking to the deck and clogging up the discharge.
Pick a glossy finish like Gloss Black RustSeal for the slickest surface and watch the grass fall right off and not clog up your mower.
+Go HERE to order the System Sampler which contains everything you need to clean, prep, & apply two coats of RustSeal on up to a 12.5 square foot area.