Give The Gift to Stop Rust – KBS Coatings Gift Certificate

Make it easy. Your friends and family can choose anything that KBS offers. Just give a KBS Gift Card and the recipient can choose any of our products.

You can buy KBS Gift Certificates in denominations of $25 to $200. These are electronic gift certificates, and can be used to purchase any of the renowned KBS Coatings restoration products & work gear available online or from our catalog.

Gift Certificate from KBS Coatings

+More Info

RustSeal – Comes in Cat Yellow – Stop Rust Paint


Our Newest Completely Non-Porous Rust Preventive Paint

Motor Coater

Cat Yellow RustSeal is a full spec industrial yellow with micronized corrosion barrier pigments in a color well recognized on any work site as Cat Yellow. Heavy vehicle maintenance will never be the same!

KBS RustSeal is a superior one part, ready-to-use, high-solids content, rust preventive coating, that is actually hardened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel. Get some for your project today!


Engine Paint – 3 New Colors of Motor Coater

Motor Coater - Engine PaintKBS Coatings introduces 3 NEW COLORS of Motor Coater Engine Enamel: Ford Green, Chrysler Blue & Cadillac Dark Blue. This brings our current color choices to 15 with more on the way in the near future.

Motor Coater is easy to apply, offers superb coverage and yields a self-leveling professional looking finish. Your engine will be a show stopper at this DIY price…too bad it’s kept under the hood!


  • Fast-drying
  • High Performance
  • Extremely High Gloss
  • High Quality Acrylic Enamel
  • Brush Marks Flow Out
  • Withstands Temperatures up to 450°F
  • Matches OEM Standards
  • Will Not Blister, Flake, Crack or Peel
  • Oil, Transmission Fluid and Gas Resistant
  • A Pint is Usually Enough to do an Entire Engine

Chevy Orange Gloss Black Aluminum Ford Corporate
Ford T-Bird Red Pontiac Metallic Blue

White Hemi Orange Fire Red Ford Dark
Daytona Yellow Velvet Black

Ford Green Chrysler Blue Cadillac
Dark Blue

Get more information or place your order direct from KBS Coatings:

Customer Feedback on Tank Sealer

I noticed a very strong gasoline smell coming from my garage one day,I Started looking around at all my toys and noticed my motorcycle gas tank was leaking.
I started looking online for a new one(Ebay)first,All I could find was used ones that where dented and beat up for $300.00 to $500.00 range,As my bike is a 1989 they are a rare find.
I then went to some online motorcycle forums to see what other people where doing to fix their tanks and came across the KBS Coatings name as being one of the best repair options out there. There is a few other companys offering tank sealer kits but KBS was rated as a much better product to use. So I ordered the 3 part system kit and was pretty easy to do. The Aquaklean and Rustblast formulas work very well. It started off with a pin hole leak and ended up with roughly 10 more when I was done the 1st two processes,I ended up ordering their NuMetal Epoxy to be sure the holes where filled before sealing was put in. All said and done about 10%cost 0f a new tank,It is a real good deal and very easy process to do.

You can find complete instructions for the Gold Standard Gas Tank Sealer here:

You can also find the Fix-It Guide which will help you quickly identify the causes of and the recommended solutions for the most common issues that could occur with Tank Sealer here:

You can also find Instructional Videos here:

You can also find Tank Sealer Flow Charts here:–Tank-Sealer_ep_88-1.html

KBS Gas Tank Liner Featured in Custom Classic Trucks

KBS Coatings has once again been featured in a national publication: Custom Classic Trucks.

You can view the entire article here:

In the article, Ron describes how he used the KBS Auto Fuel Tank Sealer Kit to seal the tank of an F-1.

As always, feel free to grab a copy of the April 2010 edition of Custom Classic Trucks and check out what others are saying about KBS Coatings.

Toyota chooses NuMetal Epoxy Putty

Toyota has chosen KBS NuMetal Epoxy Putty as an essential part of fixing their Accelerator Pedal Recall.

NuMetal Epoxy Putty is an easy-to-use, two-part putty that mixes like clay but hardens like steel! NuMetal bonds, seals, fills, insulates, anchors, caulks and waterproofs. It cures without shrinking or sagging and can be drilled, tapped, sanded, primed and painted. NuMetal will not only stick to damp surfaces, but it will cure underwater!

Our Black NuMetal is ideal for automotive applications … if the surface coating sustains damage, the black epoxy putty beneath remains unseen! Use White NuMetal for marine applications and boat repairs. Satisfaction guaranteed

<< Go Here to Order NuMetal >>

<<Go Here for more information on NuMetal Epoxy Putty>>

KBS Introduces Hi-Temp Seal – Header Paint

KBS HI-Temp is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500°F (260°C) to 1500°F (812°C).

With proper preparation, Hi-Temp provides outstanding adhesion, film integrity, corrosion, weathering and thermal shock-resistance throughout this entire temperature range, and is guaranteed not to burn off!

H-Temp - Header Paint

H-Temp - Header Paint

Withstands temperatures up to 1500°F
Will not peel, flake, or chalk
Will not burn off

More Info on Hi-Temp>>
Directions and Tech Data for Hi-Temp>>

Gonzo Talks about Tank Sealer Kits

“I own a 71 Moto Guzzi that I’ve been painstakingly rebuilding. Well, I sent the gas tank out to be pressure tested and sealed prior to doing anything on the bike. I got it back and you could see the coating. Well, after several years and getting the bike painted we got her back together and on our maiden voyage we discovered a leak in the tank. Well what can i do? It’s been several years sense I had it painted. Well a friend told me of your product. I purchased it and after following the directions to the “t” I can’t be any happier. I would and do recommend this product to anybody that has a leak!”

“Your truly a very happy gonzo!”

View more Feedback on Tank Sealer Kits and other KBS Coatings Products HERE.

Find more information on Sealing a Gas Tank HERE.

Mike Talks about KBS Frame Coater Kit

others - Stop Rust

others - Stop Rust

others - Stop Rust

"Frame Coater Kit was just the right amount for two coats top and bottom of tub on a 1965 Toyota Land Cruiser restoration. Great product; easy to use and self leveling characteristic makes it look like I knew what I was doing!"- Mike J.

You can read see more Customer Photos HERE.

Find the Frame Coater Kit – Chassis Paint Kit HERE.

KBS Coatings Introduces DiamondFinish ClearCoat

KBS Coatings introduces the latest to their line of high quality coatings for the Home, Automotive, Marine and Farm Industries.

KBS DiamondFinish ClearCoat is a permanent high solids Clear Coat. It is the latest development in ultra high performance clear coats with very high solids (over 60%) and low VOCs.

DiamondFinish ClearCoat is incredibly tough and hard like no other clear coat on the market. This water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.

DiamondFinish ClearCoat can be applied with a brush (without leaving any brush marks), roller and conventional spray gun. Unlike normal two part coatings, no hardener is needed. You can just stir and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50 to 86 degrees Fahrenheit.

DiamondFinish ClearCoat can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part or Two Part paints. It can also be applied to Non Ferrous metals including Aluminum, Alloys, Brass, Chrome and Copper.

DiamondFinish ClearCoat is able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone. Because DiamondFinish ClearCoat is so resistance to these materials, that means Graffiti just won’t stick and can be removed simply with a solvent soaked rag.

DiamondFinish ClearCoat is able to perform in the high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 325 degrees Fahrenheit.

Give KBS DiamondFinish ClearCoat a try today and you will not be disappointed. We guarantee it or your money back.

To order or for more information: