Fixed Rusty Windshield Channel
“Leaky windshield removed to reveal rusty channel. Cleaned with wire brush and then followed directions as described. Channel looks great and ready for glass!”
-Jason A.
Be sure to check out the System Sampler and BlackTop.
Brush-On Clear Coat
“DiamondFinish Clear came out really great after letting the base coat (Pettit EasyPoxy polyurethane/silicone) cure for a week and after only one coat of DiamonFinish brush-on clear, some wet sanding with 1000 and 2000 grit and compound in some areas and to fix a few sags due to shape of the object. …I’m very happy with the result.” -Marinus
Please check out DiamondFinish Clear.
1977 AMC Matador Engine
“We were rebuilding the 360 V8 to put into a 1977 AMC Matador station wagon. Using the correct AMC blue paint was important, and KBS had the hard to find AMC blue paint that was used in the 70s only.” -Brian B.
Be sure to check out Motor Coater.
1968 Jeep CJ5 Frame
“I am working on a frame-off restoration 1968 Jeep CJ5. The frame was sandblasted then coated with two coats of KBS RustSeal applied with a 2″ brush. There was little to no rust on my frame, so per the application flow chart, the RustSeal was applied directly to the clean blasted metal.” -Tim E.
Be sure to check out RustSeal.
Resto Mod on my ’75 CJ5
“This is my idea of a fun Resto Mod on my ’75 CJ5. The Frame was completely reworked and rewelded then KBS Kleaned, RustBlasted and and finally sprayed with RustSeal.. I got carried away since its down to the frame anyway and have been giving every nut and bolt a going over. Its not a show vehicle but with a 454 BBC it will show pretty well I think! :-)” – Henry S
https://www.kbs-coatings.com/frame-coater-kit.html
BlackTop on Entire Jeep
“I wire wheeled the entire tub, used the three stage Chassis kit Chassis Paint Kit – KBS All-In-One Chassis Kit – KBS Coatings – prewash, metal prep, then applied paint with a brush/roller,.. I painted the chassis, tub (inside & out), fenders, hood, bumpers and windshield frame.. The main thing with this type of paint is to do ALL of the prep work, however painstaking it may be, and READ the instructions twice before starting. (That advice is for any of the rust preventive sealer paints.)” -JavaTree on Jeepforum.com
Gas Tank Coated Inside and Out
“Finished my fuel tank this past weekend and all went well. I had first started with cleaning the tank and welding a few holes up in my 44 gallon aluminum tank. I do have to say that this all took a matter of weeks to complete because of proper drying and work schedule. The process was very straight forward. I couldn’t believe how well the Gold Standard coated the inside of the tank with multiple baffles in the tank. I then painted the exterior with gloss black. This being in the hull of my boat never to be seen by sun again but it sure looks good. Thanks for such a great product!” -Glenn B.
XTC on Exhaust Pipes
“I used your Pure White XTC spray on paint to solve what has been a constant problem with the side pipes on my car since I’ve had it. After a good prep & XTC Primer, several coats applied as directed, I now have the best results yet. Thank You!” -Bill C.
https://www.kbs-coatings.com/XTC.html
RustSeal Safety Blue on Alternator
“Had my Ford 6G high output alternator rebuilt, and wanted to refinish it. Regular spray paint just do not hold up under the hood. I tried Rustseal Safety Blue, as it was close to Ford blue. Glad I did! Was very easy to apply, spread well and self leveled perfectly on all the alternators cast surfaces. Once it cured, it was not only rock hard, but the blue is beautiful!! The color is awesome, bright and looks great!!” -Robert B.
Brush Marks Flow Out – DiamondFinish Clear
“A few years back I was searching for a product that I could brush on and level itself to a sprayed finish appearance. DiamondFinish Clear was it! I use this product to seal and finish out door public art sculptures. These photos are of the most recent project I’m working on which made the news during a press conference. Thank you for the quality professional Finish from KBS !! I’m also letting more people know how great this product is. I have been spraying and brushing finishes for twenty plus years and have never used a better product with a brush than KBS DiamondFinish Clear. Thank you!” -Peter B.
